loading

AIOTOIA is committed to smart manufacturing and industrial IoT solutions since 2008.

Embedded industrial computer  M90 1
Embedded industrial computer  M90 2
Embedded industrial computer  M90 3
Embedded industrial computer  M90 4
Embedded industrial computer  M90 1
Embedded industrial computer  M90 2
Embedded industrial computer  M90 3
Embedded industrial computer  M90 4

Embedded industrial computer M90

◆ Supports Intel LGA1851 Gen15 CPUs with a TDP up to 125W.
◆ 4 DDR5 U-DIMM slots support up to 196GB of RAM and support ECC.
◆ Expansion slots can expand to 6 PCIe lanes and 1 PCIe lane.
◆ Quad-display/4 SATA/2 M.2/14 USB/6 COM ports.
◆ Industrial-grade port protection blocks electrostatic discharge and surges, effectively protecting the system core for stability and reliability.
◆ Supports PCIe 5.0 high-performance dual GPU cards for AI deep learning and machine vision applications.
5.0
design customization

    oops...!

    no product data.

    Go to homepage

     M90

    ◆ Supports Intel LGA1851 Gen15 CPUs with a TDP up to 125W.
    ◆ 4 DDR5 U-DIMM slots support up to 196GB of RAM and support ECC.
    ◆ Expansion slots can expand to 6 PCIe lanes and 1 PCIe lane.
    ◆ Quad-display/4 SATA/2 M.2/14 USB/6 COM ports.
    ◆ Industrial-grade port protection blocks electrostatic discharge and surges, effectively protecting the system core for stability and reliability.

    ◆ Supports PCIe 5.0 high-performance dual GPU cards for AI deep learning and machine vision applications.


    M90-1

    product size

    Product model

    M90

     

    System configuration

    processor
    Supports Intel LGA1851 packaged Gen15 CPUs with a TDP up to 125W
    chipset
    Intel® W880 chipset, supports vPro
    Memory
    Four DDR5 UDIMM memory slots, supporting dual-channel and ECC memory, with a maximum capacity
    of 192GB per module and a supported frequency of 5600MHz.

     

     

     

    I/O interface

    Network interface  Six Intel high-speed Ethernet ports: LAN1: 219LM; LAN2-6: i210AT
    DP   1 DP interface
    HDMI  2 HDMI interface
    VGA  1 VGA interface
    USB  Six of the ten USB 3.2 Type-A ports are directly brought out from the rear I/O pins. There are two onboard USB 3.0 headers, allowing for four USB 3.2 ports. Two USB 2.0 ports are internally mounted vertically for USB dongles; two USB 2.0 headers are provided near the board edge for front panel expansion. The front panel USB headers F_USB1 and F_USB2 are optional, accommodating two different pitch connectors for chassis cables.
    COM  6 serial ports (COM1 & 2 support RS232/422/485, COM3-6 support RS232)
    Digital I/O  One 16-bit isolated digital I/O, providing power and ground at +5V levels.
    audio  The rear I/O supports three-hole audio outputs: MIC-In, Speaker-Out, and Line-In. A front panel audio header (F_Audio) is pre-installed on the board.
    antenna  Reserve 3 WIFI antenna hole
    switch  One power switch / one reset switch
    power interface  2* 2pin Phoenix Terminals

    Expansion bus

    2 PCIe x16 slots (x8 signal) support PCIe 5.0 with a maximum data bandwidth of up to 32GB/s.
    3 PCIe x4 slots support PCIe 4.0 with a maximum data bandwidth of up to 8GB/s.
    1 PCIe x4 (x1 signal) slot supports PCIe 4.0 with a maximum data bandwidth of up to 2GB/s.
    1 PCIe
    storage
    Four SATA 3.0 (6 Gb/s) ports, supporting SATA RAID 0/1/5/10. Two M.2 2242/2280 Key-M slots
    supporting RAID 0/1 (M2-KEYM1 supports NVMe, M2-KEYM2 supports SATA/NVMe adaptive).
    Installation methods
    Desktop installation, wall mounted installation, VESA installation
    Weight

    *

    Operating system
    Win10/Linux,64bit
    Chassis size
    361×360×230mm(W*H*D)
    work environment
    Working temperature/humidity requirements: 0 ℃ ~60 ℃ Celsius, 5%~90% (non condensing state)
    Non working temperature/humidity requirements: -40 ℃ to 70 ℃ ; Humidity: 5% to 90% (non condensing state)

    order information

    M90
    Embedded industrial computer/EC0-W880/15th generation CPU/DDR5 memory/Hard drive(optional)/Quad display:DP+HDMI+HDMI+VGA(optional)/4SATA/2M.2/14USB/6COM

     

    We always look forward to establishing a connection with you with an open attitude.

    E-MAIL US
    binghui.zhou@xyang.net
    SUPPORT 24/7
    +86 15626052718
    CONTACT PERSON
    Zhou Binghui
    no data
    Related Products
    no data

    A high-tech industrial computer manufacturer specializing in the sales and development of embedded industrial control motherboards and industrial control computers, focusing on customization, with an independent production workshop.

    Contact Us
    Add: Floor 9, Building 1, U Valley Digital Valley, Liandong, Knowledge City, Longhu Street, Huangpu District, Guangzhou City, Guangdong Province, China

    Contact: Zhou Binghui

    Phone: +86 15626052718

    Email: binghui.zhou@xyang.net

    Copyright © 2025 Guangzhou Xiyang Electronics Co., Ltd. | Sitemap
    Contact us
    email
    phone
    Contact customer service
    Contact us
    email
    phone
    cancel
    Customer service
    detect